Steel blades
Flat steel blades, fixed to rails between the posts. Blade spacing and finish are chosen to suit the job, and we go through the options when we measure.
Flat steel blades on steel posts, set out straight.
Steel blade fencing is built from flat steel blades fixed to steel posts and rails. We build it for homeowners, builders and body corporates across Melbourne.
Every site is different, so we measure first and go through the options with you. Post spacing and footing depth for steel blade fences are set on site.
Steel blade suits homes, builders and body corporates who want a steel fence.
A steel blade fence is flat steel blades on steel posts, and we choose the blade spacing and finish with you.
Flat steel blades, fixed to rails between the posts. Blade spacing and finish are chosen to suit the job, and we go through the options when we measure.
Galvanised steel posts, set in concrete footings sized to the site.
Four steps, from your first message to a finished fence. See the process in full.
Send photos, measurements or a quick description of what you're after. We can give a rough idea or organise a time to come out.
We come out, take accurate measurements and go through the best options for your property. You receive a clear, itemised quote.
Once approved, we lock in a date and organise materials so everything is ready to go.
We complete the job with a clean, straight finish and leave the site tidy. Final payment is made once the job is done.
We set footings to suit the ground, space posts to our standard and fix everything straight. Here is how.
700mm deep as standard for a 1.8m fence in normal ground. About 300mm deeper and wider in sandy soil. Fill, rock and exposed sites are assessed on site.
Posts are set in concrete. Spacing and depth for steel blade are set on site.
String-line set-out for straight runs.
Galvanised or stainless fixings, chosen to suit the material.
Your date is locked in and materials are organised before we start.
The site is left tidy. Final payment is made once the job is done.
The price depends on the length, height, style and material, and the ground. Every site is different, so we measure first and send a clear, itemised quote. Quotes are free.
More fence means more posts, footings and materials.
Taller fences need bigger posts and deeper footings.
Timber paling, Colorbond®, steel blade, picket and custom fences each use different materials and labour.
Sand, fill, rock, slope and exposed sites change how we set the footings.
Steel does not rot, but it can rust at the base, so the coating and drainage decide how long the posts last.
Galvanised steel posts last anywhere from a few years to about 50, depending mostly on the coating and on water not pooling at the base. Hot-dip galvanised posts last several times longer than thin pre-galvanised ones.
A footing that sheds water helps. Keep soil, mulch and garden beds from building up against the base. These are typical figures, not guarantees.
We will add photos of our steel blade jobs to the Projects page as they are finished.
We service all of Melbourne, including Toorak, Brighton, Elwood, Malvern and Hawthorn.
A steel blade fence is built from flat steel blades fixed to steel posts and rails. We set out the blades straight and match the fixings to the material.
Steel does not rot, but it can rust at the base, especially if water pools there. Well-coated, hot-dip galvanised posts last several times longer than thin pre-galvanised ones. A footing that sheds water helps.
Our standard footing depth is 700mm for a 1.8m fence in normal ground, and about 300mm deeper and wider in sandy soil. For steel blade, we set depth and post spacing on site.
It depends on the length, height, style and ground. We measure the site and send a clear, itemised quote. Quotes are free.
Yes. We work with homeowners, residential and commercial builders, and body corporates, and we send completion photos when the job is done.
We usually reply within 3 hours.
Got photos or plans? Text them to 0421 653 583 or email info@svfencing.com.