Skip to content

Fence post and footing guide for Melbourne

What goes in the ground decides how long a fence stands straight. Here is how we think about posts, soil and wind.

Post Types

Post types and how long they last

Treated pine, hardwood, galvanised steel and aluminium all work. The right one depends on the fence, the soil and the site, and every lifespan below depends on soil, drainage and exposure.

Treated pine (H4)

What it is
Pine treated for in-ground use, rated H4.
Typical lifespan
About 15 years in the ground. H4 is the treatment used for in-ground jobs with a 15-year target design life.
Pros
Widely available and a familiar timber look.
Cons
Timber can rot at ground level where the soil stays damp.
Maintenance
Keep soil and mulch from building up at the base, and shape the top of the concrete so water runs away.

Hardwood and cypress

What it is
Naturally durable timber, such as cypress.
Typical lifespan
Depends on the species. The most durable last over 25 years, the next group about 15 to 25 years, and lower grades 5 to 15 years or less.
Pros
Dense and strong, with good natural durability.
Cons
Like any timber, it is most at risk at ground level in wet, poorly drained soil.
Maintenance
Let water drain away from the post at ground level.

Galvanised steel

What it is
Square hollow section and C-section posts, used for sheet-steel fencing and as an option for timber paling.
Typical lifespan
Anywhere from a few years to about 50, depending mostly on the coating. Hot-dip galvanised posts last several times longer than thin pre-galvanised ones.
Pros
Does not rot, warp or split.
Cons
It can rust at the base, and water pooling there makes it worse.
Maintenance
Use a footing that sheds water and keep garden beds and mulch off the base.

Aluminium (powder-coated)

What it is
Powder-coated aluminium posts, used for metal picket and decorative fencing.
Typical lifespan
Depends on the coating and the site. We have no sourced figure to quote.
Pros
Does not rot.
Cons
Suits lighter fencing styles rather than tall solid fences.
Maintenance
Keep the powder coat intact and the base clear of soil build-up.

These are typical figures, not guarantees. Sources: Queensland Government timber guide and Diamond Fence, citing Australasian Wire Industry Association figures.

Soil Conditions

Soil conditions in Melbourne

Soil changes how deep and how wide a footing needs to be. Our standard is 700mm deep for a 1.8m fence in normal ground.

Reactive clay

Common across much of Melbourne. It swells when wet and shrinks when dry, so posts can move. We use deeper footings, good drainage and posts that do not rot.

Sandy soils

Found in the bayside and south-east. Sand grips a post less than clay, so we go about 300mm deeper and wider than standard.

Rock

Footings are adjusted on site to suit what we find.

Fill and new estates

Ground that has not been compacted. We assess it on site, and it usually needs deeper footings.

Wind Exposure

Wind and your fence

A solid fence catches the full force of the wind, and a slatted fence lets some through. Exposed sites and taller fences need more from the posts and footings.

Solid (sheet steel, paling, solid screens): the full wind load lands on the posts.
Slatted or gapped: wind passes through, so the load on the posts is lower.

Open estates, coastal sites, hilltops and corners are more exposed, and so are taller fences. They need bigger posts, closer spacing and deeper footings. We don't put a number on that without seeing the site. It is assessed on site before we quote.

Footing Recommender

Get a starting point for your fence

Choose your fence, height, soil and wind exposure. You'll get the post, spacing and footing depth we'd usually start from.

Questions

Fence post FAQs

How deep should fence posts be?

Our standard footing depth is 700mm for a 1.8m fence in normal ground. In sandy soil we go about 300mm deeper and wider. Fill, rock and exposed sites are assessed on site, and usually need deeper footings.

How far apart are fence posts?

We space posts 2.7m apart for timber paling fences, on timber or steel posts, and 2.4m apart for Colorbond®. Exposed sites and taller fences usually need closer spacing, which we assess on site.

How long do fence posts last in the ground?

It depends on the post, the soil, drainage and exposure. H4 treated pine is designed for about 15 years in the ground. Hardwood ranges from over 25 years for the most durable species to 5 to 15 years or less for lower grades. Galvanised steel ranges from a few years to about 50, depending mostly on the coating. These are typical figures, not guarantees.

Steel or timber posts: which lasts longer?

Well-coated steel can outlast timber because it does not rot, but thin or poorly coated steel can rust at the base. The most durable hardwoods can also last over 25 years. Water draining away from the base of the post helps either material.

Does Melbourne clay affect fence footings?

Yes. Reactive clay swells when wet and shrinks when dry, which can move posts. It calls for deeper footings, good drainage and posts that do not rot.

Who pays for a dividing fence in Victoria?

Under the Fences Act 1968, neighbours generally share the cost of a dividing fence equally, with exceptions such as one neighbour wanting a more expensive fence or damaging the existing one. Check the Victorian Government fencing page for the current rules.

Not sure what your site needs?

Book a free quote